Menene sassan tsarin allura?

Menene sassan tsarin allura?

Allura mold wani muhimmin tsari kayan aiki a cikin filastik masana'antar sarrafa, da tsarin abun da ke ciki ne quite hadaddun da lafiya.Mai zuwa shine cikakken bayani game da manyan abubuwan da suka shafi tsarin allura:

1, sassa na gyare-gyare

Sashin da aka ƙera shi ne ainihin ɓangaren allura, wanda ke zuwa cikin hulɗa kai tsaye tare da filastik kuma ya samar da siffar samfurin.Ya fi hada da rami, core, zamiya block, karkata saman, da dai sauransu The rami da core samar da waje da ciki siffar samfurin, yayin da sliders da karkata saman da ake amfani da su samar da gefen core-ja ko baya tsarin a cikin samfurin. .Waɗannan sassa da aka ƙera galibi ana yin su ne da ƙarfe mai inganci kuma ana yin su daidai da injin da zafin jiki don tabbatar da daidaiton girman su da ingancin saman su.

2. Tsarin zubewa

Tsarin zubowa ne ke da alhakin jagorantar narkakkar robobi daga bututun gyare-gyaren allura zuwa ramin ƙura.Ya ƙunshi babban tashar, tashar karkata, kofa da ramin sanyi.Babban tashar ta haɗu da bututun injin ɗin allura da na'ura mai jujjuyawar, sannan ta rarraba narkar da robobin zuwa kowace kofa, wanda shine muhimmin sashi na sarrafa robobin a cikin rami.Ana amfani da ramin sanyi don tattara kayan sanyi a farkon gyare-gyaren allura don hana shi shiga cikin rami kuma yana shafar ingancin samfurin.

3. Hanyar jagora

Ana amfani da tsarin jagora don tabbatar da daidaito da kwanciyar hankali na ƙirar a lokacin rufewar ƙirar da buɗewa.Ya ƙunshi babban gidan jagora da hannun rigar jagora.An shigar da sakon jagora a cikin ɓangaren mutuƙar motsi na ƙirar, kuma an shigar da hannun rigar jagora a cikin ƙayyadadden ɓangaren mutu.Yayin aikin rufewa, ana shigar da post ɗin jagora a cikin hannun rigar jagora don tabbatar da daidaitaccen jeri na ƙirar kuma kauce wa karkacewa.

4. Tsarin saki

Ana amfani da injin fitarwa don fitar da samfurin da aka ƙera daga cikin ƙirar lafiya.Yawanci ya haɗa da thimble, ejector sanda, farantin saman, sandar sake saiti da sauransu.The thmble da ejector sanda sune abubuwan da aka fi sani da ejector waɗanda ke taɓa samfurin kai tsaye don fitar da shi daga cikin rami.Ana amfani da farantin saman don tura cibiya ko rami don fitar da samfurin a kaikaice.Ana amfani da sandar sake saiti don sake saita tsarin fitarwa bayan buɗe ƙirar.

5, tsarin kula da yanayin zafi

Ana amfani da tsarin kula da zafin jiki don sarrafa yanayin ƙira don inganta tsarin ƙirƙirar filastik.An haɗa tashar sanyaya da kayan dumama.Ana rarraba tashar ruwa mai sanyaya a cikin mold, kuma zafi na ƙirar yana ɗauke da mai sanyaya mai kewayawa.Ana amfani da abubuwa masu dumama don ɗaga ƙurar ƙura a lokacin da ake buƙata, kamar preheating na ƙura ko kiyaye yanayin zafin ƙura.

Don taƙaitawa, tsarin tsari na gyare-gyaren allura yana da wahala sosai kuma yana da kyau, kuma kowane sashi yana taka muhimmiyar rawa wajen tabbatar da ingancin gyare-gyare da ingancin samfuran filastik.