Menene buƙatun fasaha na allura mold polishing?

Menene buƙatun fasaha na allura mold polishing?

Tsarin allurapolishing fasahar tana nufin aiki da kuma lura da allura mold surface don inganta gama da flatness na mold.

Abubuwan buƙatun fasaha na allura mold sun haɗa da abubuwa 7 masu zuwa:

(1) Santsin saman: Ya kamata a kiyaye saman allurar a cikin santsi mai kyau, ba tare da kututtuwa ba, karce ko wasu lahani.Ana iya samun wannan ta hanyar amfani da kayan aikin niƙa da dabaru masu dacewa, kamar takarda yashi, ƙafafun niƙa, injin niƙa, da sauransu.

(2) Ƙarshe: Ya kamata saman ƙirar allura ya sami ƙayyadaddun ƙarewa don tabbatar da ingancin samfurin da aka ƙera.A polishing tsari na bukatar yin amfani da abrasive kayan daban-daban barbashi masu girma dabam don a hankali cire lahani da roughness na mold surface har sai da ake so gama da aka cimma.

(3) Cire Layer oxide: ƙirar allura na iya samar da ƙoshin oxide yayin amfani, yana shafar ingancin farfajiya da rayuwar sabis na mold.Sabili da haka, Layer na oxidation akan farfajiyar ƙirar yana buƙatar cirewa gaba ɗaya yayin aikin gogewa don tabbatar da aikin yau da kullun na ƙirar.

(4) Cire karce da lahani: Ƙunƙasa da lahani a saman ƙirar allura za su yi tasiri ga bayyanar da ingancin samfurin da aka ƙera.A cikin aikin gyaran gyare-gyaren gyare-gyaren gyare-gyare, ana buƙatar dubawa a hankali kuma an yi amfani da kayan aiki da fasaha masu dacewa don cire ƙazanta da lahani, ta yadda fuskar ƙirar ta kai matsayi mai laushi da maras kyau.

(5) Kula da daidaiton ƙira: Daidaitaccen girman ƙirar ƙirar allura yana da mahimmanci sosai don girma da siffar samfurin da aka ƙera.A cikin tsarin gyaran gyare-gyare, wajibi ne a kula da kiyaye daidaiton girman nau'i na ƙirar don kauce wa ɓata girman ƙirar da aka yi ta hanyar gogewa.

(6) Guji nakasawa da lalacewa: ƙwayar allurar tana buƙatar kulawa don guje wa lalacewa da lalacewar ƙirar yayin aikin gogewa.Lokacin goge-goge, yakamata a yi amfani da matsi mai dacewa da saurin gudu don gujewa aiki da yawa ko aiki mara daidaituwa wanda ke haifar da nakasu ko lalacewa.

(7) Tsaftacewa da rigakafin tsatsa: gogewar alluran da aka goge yana buƙatar tsaftacewa da rigakafin tsatsa don kiyaye farfajiyar ƙirar ta santsi da tsawaita rayuwar ƙirar.Tsaftacewa na iya amfani da ma'aikatan tsaftacewa na musamman da kayan aiki, za'a iya amfani da tsatsa don hana tsatsa ko kuma an rufe shi da wani bakin ciki na man fetur.

Gabaɗaya, buƙatun fasaha donallura mpolishing sun haɗa da santsin ƙasa, ƙarewa, kawar da yadudduka na oxide, kau da ɓarna da lahani, kiyaye daidaiton girma, guje wa lalacewa da lalacewa, da tsaftacewa da rigakafin tsatsa.